home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Atari Mega Archive 2
/
Atari Mega Archive CD - Volume 2.iso
/
linux
/
tools
/
gtar10.lha
/
tar.h
< prev
next >
Wrap
C/C++ Source or Header
|
1992-09-09
|
9KB
|
298 lines
/*
Copyright (C) 1988 Free Software Foundation
GNU tar is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY. No author or distributor accepts responsibility to anyone
for the consequences of using it or for whether it serves any
particular purpose or works at all, unless he says so in writing.
Refer to the GNU tar General Public License for full details.
Everyone is granted permission to copy, modify and redistribute GNU tar,
but only under the conditions described in the GNU tar General Public
License. A copy of this license is supposed to have been given to you
along with GNU tar so you can know your rights and responsibilities. It
should be in a file named COPYING. Among other things, the copyright
notice and this notice must be preserved on all copies.
In other words, go ahead and share GNU tar, but don't try to stop
anyone else from sharing it farther. Help stamp out software hoarding!
*/
/*
* Header file for tar (tape archive) program.
*
* @(#)tar.h 1.24 87/11/06
*
* Created 25 August 1985 by John Gilmore, ihnp4!hoptoad!gnu.
*/
#include "testpad.h"
/* major() and minor() macros (among other things) defined here for hpux */
#ifdef hpux
#include <sys/mknod.h>
#endif
/*
* Kludge for handling systems that can't cope with multiple
* external definitions of a variable. In ONE routine (tar.c),
* we #define TAR_EXTERN to null; here, we set it to "extern" if
* it is not already set.
*/
#ifndef TAR_EXTERN
#define TAR_EXTERN extern
#endif
#if defined(USG) && !defined(XENIX) && !defined(HAVE_SIZE_T)
typedef int size_t;
#endif
/*
* Header block on tape.
*
* I'm going to use traditional DP naming conventions here.
* A "block" is a big chunk of stuff that we do I/O on.
* A "record" is a piece of info that we care about.
* Typically many "record"s fit into a "block".
*/
#define RECORDSIZE 512
#define NAMSIZ 100
#define TUNMLEN 32
#define TGNMLEN 32
#define SPARSE_EXT_HDR 21
#define SPARSE_IN_HDR 4
struct sparse {
char offset[12];
char numbytes[12];
};
struct sp_array {
int offset;
int numbytes;
};
union record {
char charptr[RECORDSIZE];
struct header {
char name[NAMSIZ];
char mode[8];
char uid[8];
char gid[8];
char size[12];
char mtime[12];
char chksum[8];
char linkflag;
char linkname[NAMSIZ];
char magic[8];
char uname[TUNMLEN];
char gname[TGNMLEN];
char devmajor[8];
char devminor[8];
/* these following fields were added by JF for gnu */
/* and are NOT standard */
char atime[12];
char ctime[12];
char offset[12];
char longnames[4];
#ifdef NEEDPAD
char pad;
#endif
struct sparse sp[SPARSE_IN_HDR];
char isextended;
char realsize[12]; /* true size of the sparse file */
/* char ending_blanks[12];*/ /* number of nulls at the
end of the file, if any */
} header;
struct extended_header {
struct sparse sp[21];
char isextended;
} ext_hdr;
};
/* The checksum field is filled with this while the checksum is computed. */
#define CHKBLANKS " " /* 8 blanks, no null */
/* The magic field is filled with this if uname and gname are valid. */
#define TMAGIC "ustar " /* 7 chars and a null */
/* The linkflag defines the type of file */
#define LF_OLDNORMAL '\0' /* Normal disk file, Unix compat */
#define LF_NORMAL '0' /* Normal disk file */
#define LF_LINK '1' /* Link to previously dumped file */
#define LF_SYMLINK '2' /* Symbolic link */
#define LF_CHR '3' /* Character special file */
#define LF_BLK '4' /* Block special file */
#define LF_DIR '5' /* Directory */
#define LF_FIFO '6' /* FIFO special file */
#define LF_CONTIG '7' /* Contiguous file */
/* Further link types may be defined later. */
/* Note that the standards committee allows only capital A through
capital Z for user-defined expansion. This means that defining something
as, say '8' is a *bad* idea. */
#define LF_DUMPDIR 'D' /* This is a dir entry that contains
the names of files that were in
the dir at the time the dump
was made */
#define LF_MULTIVOL 'M' /* This is the continuation
of a file that began on another
volume */
#define LF_NAMES 'N' /* For storing filenames that didn't
fit in 100 characters */
#define LF_SPARSE 'S' /* This is for sparse files */
#define LF_VOLHDR 'V' /* This file is a tape/volume header */
/* Ignore it on extraction */
/*
* Exit codes from the "tar" program
*/
#define EX_SUCCESS 0 /* success! */
#define EX_ARGSBAD 1 /* invalid args */
#define EX_BADFILE 2 /* invalid filename */
#define EX_BADARCH 3 /* bad archive */
#define EX_SYSTEM 4 /* system gave unexpected error */
#define EX_BADVOL 5 /* Special error code means
Tape volume doesn't match the one
specified on the command line */
/*
* Global variables
*/
TAR_EXTERN union record *ar_block; /* Start of block of archive */
TAR_EXTERN union record *ar_record; /* Current record of archive */
TAR_EXTERN union record *ar_last; /* Last+1 record of archive block */
TAR_EXTERN char ar_reading; /* 0 writing, !0 reading archive */
TAR_EXTERN int blocking; /* Size of each block, in records */
TAR_EXTERN int blocksize; /* Size of each block, in bytes */
TAR_EXTERN char *ar_file; /* File containing archive */
TAR_EXTERN char *info_script; /* Script to run at end of each tape change */
TAR_EXTERN char *name_file; /* File containing names to work on */
TAR_EXTERN char *tar; /* Name of this program */
TAR_EXTERN struct sp_array *sparsearray;/* Pointer to the start of the scratch space */
TAR_EXTERN int sp_array_size; /* Initial size of the sparsearray */
TAR_EXTERN int tot_written; /* Total written to output */
TAR_EXTERN struct re_pattern_buffer
*label_pattern; /* compiled regex for extract label */
/*
* Flags from the command line
*/
TAR_EXTERN int cmd_mode;
#define CMD_NONE 0
#define CMD_CAT 1 /* -A */
#define CMD_CREATE 2 /* -c */
#define CMD_DIFF 3 /* -d */
#define CMD_APPEND 4 /* -r */
#define CMD_LIST 5 /* -t */
#define CMD_UPDATE 6 /* -u */
#define CMD_EXTRACT 7 /* -x */
#define CMD_DELETE 8 /* -D */
#define CMD_VERSION 9 /* +version */
/* -[0-9][lmh] */
/* CMD_CAT -A */
/* -b */
TAR_EXTERN int f_reblock; /* -B */
/* CMD_CREATE -c */
/* -C */
/* CMD_DIFF -d */
/* TAR_EXTERN char f_dironly; /* -D */
/* -f */
TAR_EXTERN int f_run_script_at_end; /* -F */
TAR_EXTERN int f_gnudump; /* -G */
TAR_EXTERN int f_follow_links; /* -h */
TAR_EXTERN int f_ignorez; /* -i */
/* CMD_DELETE -J */
TAR_EXTERN int f_keep; /* -k */
TAR_EXTERN int f_startfile; /* -K */
TAR_EXTERN int f_local_filesys; /* -l */
TAR_EXTERN int tape_length; /* -L */
TAR_EXTERN int f_modified; /* -m */
TAR_EXTERN int f_multivol; /* -M */
TAR_EXTERN int f_new_files; /* -N */
TAR_EXTERN int f_oldarch; /* -o */
TAR_EXTERN int f_exstdout; /* -O */
TAR_EXTERN int f_use_protection; /* -p */
TAR_EXTERN int f_absolute_paths; /* -P */
TAR_EXTERN int f_sayblock; /* -R */
TAR_EXTERN int f_sorted_names; /* -s */
TAR_EXTERN int f_sparse_files; /* -S ... JK */
TAR_EXTERN int f_namefile; /* -T */
/* CMD_UPDATE -u */
TAR_EXTERN int f_verbose; /* -v */
TAR_EXTERN char *f_volhdr; /* -V */
TAR_EXTERN int f_confirm; /* -w */
TAR_EXTERN int f_verify; /* -W */
/* CMD_EXTRACT -x */
TAR_EXTERN int f_exclude; /* -X */
TAR_EXTERN int f_compress; /* -z */
/* -Z */
TAR_EXTERN int f_do_chown; /* +do-chown */
TAR_EXTERN int f_totals; /* +totals */
/*
* We now default to Unix Standard format rather than 4.2BSD tar format.
* The code can actually produce all three:
* f_standard ANSI standard
* f_oldarch V7
* neither 4.2BSD
* but we don't bother, since 4.2BSD can read ANSI standard format anyway.
* The only advantage to the "neither" option is that we can cmp our
* output to the output of 4.2BSD tar, for debugging.
*/
#define f_standard (!f_oldarch)
/*
* Structure for keeping track of filenames and lists thereof.
*/
struct name {
struct name *next;
short length; /* cached strlen(name) */
char found; /* A matching file has been found */
char firstch; /* First char is literally matched */
char regexp;